Eunorau
EUNORAU 500C TFT Colorful Display for Bafang BBS motor and ENA kits
EUNORAU 500C TFT Colorful Display for Bafang BBS motor and ENA kits
Regular price
$69.00 USD
Regular price
$80.00 USD
Sale price
$69.00 USD
Unit price
per
Shipping calculated at checkout.
Couldn't load pickup availability
The new compact Bafang 2,2" High-contrast IPS display can show:
- battery voltage indicator and current power consumption
- actual Speed, Max Speed, Avg Speed
- ODO, Trip, Time
The display is connected to the green HIGO cable of the controller splitter
- works for Bafang BBS01, BBS02 & BBSHD (and some other Bafang systems)
- voltage in V, reading goes up to 60V
- km or miles
- error codes
- walk mode
- assist levels 0-3 or 0-5 or 0-9
- without remote
- buttons with vibration
80 x 41 x 17,4 mm
if you have a oversized bar, the display can be attached only on the outside (Ø 22,2 mm)
| Error code | Error definition | Solution |
| 07 | High voltage protection | Check the battery voltage |
| 08 | Fault with motor hall sensor inside | Hall sensor error |
| 10 | The motor temperature reaches to the max protection value | Stop riding and wait until the LED stop flickering |
| 12 | Fault with current sensor inside controller | Have your dealer check the controller |
| 13 | Fault with temperature sensor inside battery | Check the battery |
| 21 | Fault with wheel speed detecting sensor | Check wheel speed sensor |
| 22 | BMS Communication fault | |
| 30 | Communication fault | Check the connector between controller and stator and all the wiring |
